Smithy Midas 1220 XL Specifications and Accessories
 |
Specifications
|
Drill
Mill
|
Lathe
Specifications are subject to change without notice Prices listed on this page are the most current Smithy prices. They are updated regularly, but are subject to change. |
Midas 1220 XL Accessories
Four-Jaw Independent Chuck
Use this with round, square, rectangular, or irregular workpieces. Hardened, cast-iron jaws adjust separately to center your workpiece. You can remove them for large pieces or reverse them for small projects. Includes finished backplate and chuck wrench.
K99-095 ....... 6" dia. ....... $127.00
Collet Chuck
Change your setup without disturbing your alignment. Leave your alignment in place with this collet chuck. With an open through-hole to accept your collet's full capacity, this chuck bolts directly to the faceplate of the CB-1220XL.
67-000 ..............................$105.00
Lathe Pak
18-080...60 Degree Center Guage 18-060....Inch Screw
Pitch Guage
47-500... Boring Bar with Insert
43-000... Carbide Tool Bit Set
41-103... MT3 Medium-duty live center
K99-095... Four-jaw chuck & backplate
40-000...Self-Ejecting Lathe Chuck Key
42-013... MT3 Extension Socket
K99-025 .........................$ 235.40
Gunsmith's Pak
Stocked with long-wearing tools for work on barrels and
other projects this pak includes:
A. Steady rest
B. Follow rest
C. Indexable carbide turning set
D. Single end mill set
K99-020 ............................$ 264.00
Planetary Pulley
Chasing threads? Cut your speeds by 50% for working with large diameter parts or hard steels with this internally-geared pulley.
40-300 ......................$ 99.00
Protective Cover
Protect your machine from dust and moisture with this handsome blue cover. Made of 200-denier backpack material.
83-000 ..................... $ 52.50
Heavy-Duty Table
Keep the quill up tight in the head for accuracy and increase your cross-slide travel 50% with this fixed-base, nonrotating table. Featuring 8 x 4" travel, this table measures 4-1/2"H x 5-1/2"W x 12"L and has 7/16" t-slots on 2-1/2" centers.
33-005 ....................... $ 119.95
Kennedy Workstation
Give your machine a firm foundation with this workstation. Built to support up to 500 lb, it features 5 drawers, 2 shelves, and a 20 x 54 x 2 Chip Tray. Working height is 34-1/2". Additional shipping charges apply.
80-030 ...................... $ 375.00
Follower Rest/Steady Rest
K99-105 Follower Rest/Steady Rest ...........................................
$ 189.00
Faceplate Kit
For turning between centers, use this kit and a bent-tail lathe dog. Includes 7.9" faceplate and finished backplate (not sold separately).
K99-080 ......................... $ 113.50
Toolpost Grinder
Grind precise hardened-steel cylinders for bushings and
shafts. Includes a single-speed external grinding capacity of 1/8-2"
dia. and greased, sealed ball bearings. Comes complete with three coarse
and three medium-grit wheels and diamond-tipped truing bar.
86-100 (Grinder Only)............................
$ 234.95
K99-300 (Kit)....................................... $ 249.95
79-302 (60 Grit Wheel).......................... $ 3.00
79-303 (120 Grit Wheel)........................ $ 3.00
Ultra Poly Belts
Durable 100% polyurethane belts - easier to change and less costly than rubber belts. Kit includes two 22-5/16", one 26-31/32", and one 34-13/32" belt, all 5/16" dia.
K99-170 Kit ..............................
$ 13.99
81-100 ...... 22-5/16" ................ $ 3.99
81-101 ...... 26-31/32" .............. $ 4.29
81-102 ...... 34-13/32" .............. $ 4.99