Smithy Granite 1324 Specifications

• Machine dimensions: 52 x 22 1/2 x 39"
• Crate dimensions: 49 3/4 x 22 3/4 x 43 1/4"
• Shipping weight: 770 lb.
• Machine weight: 660 lb.
• Mill/drillhead stock swivel: 360 deg.
• Calibrated leadscrew dials: 0.001"
• Calibrated cross slide dials: 0.001"
• Calibrated tailstock dials: 0.001"
• Calibrated Mill & drill dials: 0.001"
• Fine feed dials: 0.050"
• Power: 1 1/2 hp dc motor
• Manufacturing: Castings and frame made in China; Motor and electrical made in USA
• Speeds: 50-1500 rpm/600-3000 rpm

Specifications subject to change without notice

Lathe

• Swing: 13" over bed, 7 1/2" over table
• Distance between centers: 24"
• Camlock spindle: D1-4
• Spindle bore: 1 1/8"
• Headstock taper: MT4
• Tailstock taper: MT3
• Pitches: SAE (inches), 7-52 tpi
• Metric pitches: 0.35 - 6.5 mm Cross
• slide travel: 7 5/8"
  

Mill

• Millhead taper: R-8
• Table: 17 3/4 x 6 1/2"
• T-slot width: 7/16"
• Spindle diameter: 2 7/8"
• Working height: 4" min, 13 3/8" max
• To faceplate: 7"

Drill

• 5/8" precision chuck (up to 3/4" available)
• Chuck arbor taper: R-8/JT3
• Spindle to table distance: 4" min, 13 3/8" max.
• Quill throw: 9 3/8"
• Spindle to support column: 9 1/2"

Four-Jaw Independent Chuck

Use this chuck when accuracy is critical with round, square, rectangular, or irregular workpieces. The hardened, cast-iron jaws adjust separately to center your workpiece precisely. You can remove them for large pieces or reverse them for small projects. Includes finished backplate and chuck wrench.

K99-102 .... 6" dia. .... $165.00

R-8 Collets

These collets feature a shaft keyway and a flare at the tooling end for centering the collet in your quill. These collets require a 7/16" drawbar.

66-252 ....... 3/16" ............ $7.25
66-254 ....... 1/4" .............. $7.25
66.256 ....... 5/16" ............ $7.25
66-258 ....... 3/8" .............. $7.25
66-260 ....... 1/2" .............. $7.25
66-262 ....... 5/8" .............. $7.25
K99-260...... Set of 1 ea...... $45.65

Steady Rest, Follow Rest

Use the steady rest to hold pieces that extend beyond the length of the bed.
The follow rest keeps workpieces from flexing. It's also good to use when cutting threads.

K99-106 ........................ $ 189.00

8" Faceplate & Backing Plate Kit

Turn between centers. Clamp a variety of pieces in t-slots when turning on the lathe. Includes faceplate and finished backplate for Granite cam-lock mount. Requires bent-tail lathe dog.

K99-081 ............................ $124.00

Bent-Tail Lathe Dog

If you are working between centers on your Granite you need the faceplate kit (K99-081) and one of these dogs.
Mount is with the squarehead screw.

40-700 ..... 1 1/4" Capacity ..... $ 9.85
40-705 ..... 2" Capacity ........... $16.75
40-710...... 3" Capacity............ $21.95

Granite Machine Stand

Custom built with a framework to support 1,000 lbs., this stand will safely and solidly support your Granite machine. A built-in chip tray provides a ready coolant-recovery system and chip containment. Additional shipping charges apply.

80-030 ...................... $ 375.00