Palmgren Vices
Prices
listed on this page are the most current prices.
They are updated regularly, but are subject to change.
New Prices Effective April 1, 2008
We Ship Across the United States
Adjustable Angle Vises With Swivel Base
For
precision work at any desired angle up to 90 degrees. Equipped with steel
jaws, grooved vertically and horizontally for holding round pieces. The
removable swivel base provides complete rotation and is calibrated 360
degrees. Castings of selected fine grain high strength gray iron are accurately
machined. Hinge pin hole is precision drilled and reamed for smooth accurate
angle settings, with no later end play. Bases have 5/8" keyway and
two bolt slots for locating and mounting on machine table.
|
|
Jaws |
Jaws |
Jaws |
Overall |
Overall |
w/base |
|
|
|
|
|
|
|
|
|
|
Angle Vises
For
precision work at any desired angle up to 90 degrees.
Equipped with steel jaws, grooved vertically and
horizontally for holding round pieces.
|
|
Jaws |
Jaws |
Jaws |
Length |
Type |
lbs. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Low Boy" Swivel Machine Vise
"Low-Boy"
machine vises are designed for applications where low overall height is
necessary. Including swivel base, heights are only 3" and 3 1/2".
Both jaw plates are ground smooth.
|
|
|
|||||||
|
|
Jaws |
Jaws |
Jaws |
lbs. |
|
|
lbs. |
|
|
|
|
|
|
|
discontinue |
|
|
discontinue |
|
|
|
|
|
|
|
|
|
|
Vises For Drill Press, Mill, Grinder
These are the traditional Palmgren drill
press vises for drilling, grinding, tapping, reaming, etc. All vises can
be turned on either side or placed on end for general use.
#6 & #14 - Grooved
steel jaw.
#10 - Grooved cast jaw.
|
|
Jaws |
Jaws |
Jaws |
Overall |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Utility Vise
The
movable jaw is grooved vertically for holding round work. Heavy steel
adjusting screw has a coarse pitch Acme thread for fast action. Three
bolt lugs are located on the vise base for mounting on the machine table.
|
|
Jaws |
Jaws |
Jaws |
Overall |
Overall |
|
|
|
|
|
|
|
|
|
|
|
Drill Press Vises
Handy
general purpose vises. Highly recommended for use on drill presses, milling
machines, grinders and many other machines. They have strong fine thread
adjusting screws and ground steel jaws grooved horizontally and vertically
for convenience in holding round pieces. Bolt lugs provided for rigid
mounting on machine table.
|
|
Jaws |
Jaws |
Jaws |
Overall |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lathe Milling Attachments
With
a lathe milling attachment one can mill slots, key ways, grooves, flats,
external and internal dovetails as well as saw, grind, and drill at any
angle right on the lathe. Mount the milling attachment to the tool post
and the cutting tool in the lathe's chuck. The machining versatility is
endless.
The 250V is recommended for 8"
and 10" lathes.
The 400V is recommended for 12" and 16" lathes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotary and Index Tables
Model
83 Shown
Rotates 360 degrees.
#83 Rotary Indexing Table
Precision ground, heavy, cast table top. T-slots, 5/8" x 1/4"
x 1". Large base with 4 slots. Adjustable rotary feed dial graduated
in 3 minute increment. Adjustable cross-feed dials graduated in thousandths.
Top bored for 1 5/8" locating plug. 2 top interlocking screws. 5/8"
key on base to fit machine table slot.
#1062 Vertical-Horizontal Indexing Table
For use in either the horizontal or vertical
position, table tops and back surfaces are ground parallel and perpendicular
to the third surface. Smooth worm and gear drive provides positive rotary
feed. The dial collar on the index shaft is graduated for 1 minute readings
with vernier dial.
|
|
|
|
|
|
Ctr |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|